Typ: AKF 250L
Motor: 400V 2,2kW
Drehzahl: 2800 U/min
Fraeser-O: 250mm
Fraeseraufnahmewelle O: 40mm
Fraesbreite: 300mm
Fraestiefe: 85mm
Profilhoehe: 160mm
Gewicht: ca. 150kg
Abmessungen B x H x T 950 x1450 x 930 mm

Power (kW): 0,85 and 1,1•
Voltage (V): 400
Air pressure (bar): 7
Milling motor speed (min-1): 12.000 / 6.000
Maximum cross section of the workpiece W x H (mm): 200 x 100
Milling range L x W (mm): 300 x 130•
Milling depth (mm): 200
Machine dimensions L x D x H (mm): 1.260 x 900 x 1.650
Weight (kg): approx. 350
Workable material: PVC, aluminium and steel profiles

Dimension WxHxD 900 x 1180 x 750 mm
Weight 360kg
Working mode hydraulic - pneumatic
Air pressure 8bar
Air consumption 40l/stroke at 8bar
Pressing force 32kN at 8bar
Air connection R1/4"
Punching stroke 17mm
Abutment stroke 140mm
Punching height max 150mm
Section height max 210mm

Max. Punching force: 60 kN
Max. Hub: approx. 35 mm
Lift release via foot switch
The currently stoked tool punch one or two 6.5 mm holes
Weight: approx. 250 kg

Rotatable support table between 0 ° and 180 °, thereby 3-page machining in a clamping
2 different speeds: 6,000 and 12,000 rotations per minute
4 pneumatically controllable copy pins
Pneumatic material tension
Minimum quantity spraying device
Max. Workpiece cross section: 190 x 105 mm (W x H)
Milling range: 300 x 1300 mm (L x B)
Immersion depth: 200 mm
Weight: approx. 380 kg

3-axis machining centre for aluminium or PVC profiles for the machining of the top
Max. X-axis travel: 2.450 mm
Max. Y-axis travel: 350 mm
Max. Z-axis travel: 280 mm
Windows controller with 2 USB ports speed up to 18,000 U. per min Minimum quantity spray device 4 pneumatic material tensioner photoelectric sensor
Additional profile stop left for longer profiles (dismantled on pallet)

The processes at the fitting table are controlled by touch screen on the computer.
This enables the processor to record the exact dimensions of glazing beads and transom bars.
All assembly steps can be displayed graphically on the monitor at the same time.
Different work areas have been combined into one work cell:
Recording of the exact dimensions for glazing beads and transom bars
Dead bolt calculation and dead bolt production
Online data connection with the glazing bead saw
Graphic representation of the assembly and its sequence
The manual calculation of the locking bars in the work preparation is no longer necessary. The production structure can be designed so that a central work area can be set up for the complete sash assembly

Pneumatic double punch for window construction tools with foot release

Max. Saw blade diameter: 450 mm
Weight: approx. 700 kg
Hydropneumatic saw blade feed via 2 manual operation
Pneumatic material tensioner
Minimum quantity spraying device
Table on both sides with snap-on points at 45 °

Max. Saw blade diameter: 500 mm
Weight: approx. 600 kg
Aluminium saw with a cutting length of up to 600 mm with hydropneumatic feed
Pneumatically adjustable angle between 45 ° and 90 °
Pneumatic material tensioner

Press height 140 mm
Pressing force 70 kN (7 t)
Hydropneumatic drive
Compressed air connection 7 bar
Air consumption per working cycle 35 l
Length 1.100 mm, depth 950 mm, height 1.230 mm
Weight 550 kg

Max. Saw blade diameter: 400 mm
Steplessly adjustable saw blade feed
2 Engine speeds
Pneumatic material tensioner
Minimum quantity spraying device

For the rework of too long-sawn profiles, both in the aluminium and plastic areas.
Swingable Material Stop
Engine speed: 712 U per min
Milling cutter diameter: 250 mm

Profile height max. 160 mm
Press force: 70 kN
Max. Punching stroke: 20 mm
Compressed air connection 6-8 bar
Weight approx. 280 kg

Hydraulic mode of operation via foot switch
Profile height max. 120 mm
Abutment stroke 100 mm
Punching stroke 50 mm
Press force 38 kN
Engine power: 3 kW
Weight approx. 500 kg

motor 400 V / 2.0 kW
speed 2.800 U/min
tool -Ø 450/400 mm
tool spindle diameter Ø 40 mm
notching height 153 mm
notching depth 128 mm
notching width 250 mm
feed manuell
weight 540 kg

3-SPINDEL-KOPIERFRÄSE Elumatec KF 178
Stufenlose Drehzahlregelung von 3.000 1/min. bis 12.000 1/min.

Dimension WxHxD 900 x 1180 x 750 mm
Weight 235kg
Working mode hydraulic - pneumatic
Air pressure 6-8bar
Air consumption 40l/stroke at 8bar
Pressing force 28kN at 8bar
Air connection R1/4"
Punching stroke 18mm
Abutment stroke 100mm
Punching height max 120mm
Section height max 150mm

Rotatable support table between 0 ° and 180 °, thereby 3-page machining in a clamping
4 pneumatically controllable copy pins
12,000 U. per Min.
Pneumatic material tension
Minimum quantity spraying device
Profile width: 30-120 mm
Profile height: 50-100 mm
Bar length: 490-3,000 mm
Weight: approx. 350 kg

Mounting device up to 6,000 mm in length
Motorized height adjustment
Manual feed of the stop with digital display