Please wait...

Categories

Machining centers offers 41

14
x-travel: 730 mm y-travel: 850 mm z-travel: 1100 mm Control: MSX 711 MAPPS IV Spindle power: 22 / 18.5 kW Spindle speed: 12000 rpm Tool magazine: 120 HSK-A 63 maximum tool diameter: 70 mm Max. tool diameter with free secondary magazine locations: 140 mm maximum tool length: 480 mm maximum tool weight: 12 kg Rapid traverse x/y/z: 50,000 mm/min A-axis (5th axis) rotary table: +30°-120°° Rapid traverse B-axis (rotary table): 50 rpm Rapid traverse A-axis (swivel axis): 20 1/min Pallet changer 2x: 500 x 500 mm max. workpiece weight: 500 kg Workpiece - installation height: 700 mm max. workpiece diameter on the pallets: 700 mm Total power requirement: 63 kVA Machine weight approx.: 21 t Space requirement approx.: 6.0 x 6.1 x 3.3 m Number of coordinate systems: 300 MAPPS Tool Management System: GB Storage capacity: 1MB Program Registers: 1000 Internal coolant supply 50 bar with filter: Frascara Additional description: Horizontal 5-axis machining center, equipped with full A and B axes, IKZ - high-pressure cooling through the work spindle 50 bar Frascara, 120-fold tool magazine HSK-A 63, chip conveyor, tool breakage and length measurement, Renishaw spindle probe. Machine is in excellent condition with few hours of use.
x-travel: 730 mm
y-travel: 850 mm
z-travel: 1100 mm
Control: MSX 711 MAPPS IV
Spindle power: 22 / 18.5 kW
Spindle speed: 12000 rpm
Tool magazine: 120 HSK-A 63
maximum tool diameter: 70 mm
Max. tool diameter with free secondary magazine locations: 140 mm
maximum tool length: 480 mm
maximum tool weight: 12 kg
Rapid traverse x/y/z: 50,000 mm/min
A-axis (5th axis) rotary table: +30°-120°°
Rapid traverse B-axis (rotary table): 50 rpm
Rapid traverse A-axis (swivel axis): 20 1/min
Pallet changer 2x: 500 x 500 mm
max. workpiece weight: 500 kg
Workpiece - installation height: 700 mm
max. workpiece diameter on the pallets: 700 mm
Total power requirement: 63 kVA
Machine weight approx.: 21 t
Space requirement approx.: 6.0 x 6.1 x 3.3 m
Number of coordinate systems: 300
MAPPS Tool Management System: GB
Storage capacity: 1MB
Program Registers: 1000
Internal coolant supply 50 bar with filter: Frascara
Additional description:
Horizontal 5-axis machining center, equipped with full A and B axes, IKZ - high-pressure cooling through the work spindle 50 bar Frascara, 120-fold tool magazine HSK-A 63, chip conveyor, tool breakage and length measurement, Renishaw spindle probe. Machine is in excellent condition with few hours of use.
8
x-travel: 500 mm y-travel: 350 mm z-travel: 510 mm Control: Mori Seiki MSX 711 (Fanuc 31i) MAPPS IV Spindle power: 22/11 kW Spindle speed: 20000 rpm Feeds x/y/z: 50 / 50 / 40 m/min Rapid traverse x/y/z: 50 / 50 / 40 m/min c-axis: 360,000 x 0.001° b-axis: +160,000/ -180,000x0.001° B-axis speed: 150 rpm Table diameter: 350 mm Workpiece height - max.: 300 mm Workpiece diameter - max.: 350 mm Workpiece weight: 100 kg Tool magazine:: 61 HSK-A 63 Total power requirement: 41 kW Machine weight approx.: 9.4 t Space requirement approx.: 2.2 x 3.8 x 3.25 m internal coolant supply: Knoll KF 110/500 70 bar Spindle probe for workpiece measurement: Renishaw OMP 60 Tool breakage and length measurement: Renishaw Additional description: Universal machining center with 5 simultaneously controlled axes with NC - swivel - rotary table. High-pressure coolant system Knoll 70 bar spindle probe Renishaw OMP 60 tool breakage and length measurement
x-travel: 500 mm
y-travel: 350 mm
z-travel: 510 mm
Control: Mori Seiki MSX 711 (Fanuc 31i) MAPPS IV
Spindle power: 22/11 kW
Spindle speed: 20000 rpm
Feeds x/y/z: 50 / 50 / 40 m/min
Rapid traverse x/y/z: 50 / 50 / 40 m/min
c-axis: 360,000 x 0.001°
b-axis: +160,000/ -180,000x0.001°
B-axis speed: 150 rpm
Table diameter: 350 mm
Workpiece height - max.: 300 mm
Workpiece diameter - max.: 350 mm
Workpiece weight: 100 kg
Tool magazine:: 61 HSK-A 63
Total power requirement: 41 kW
Machine weight approx.: 9.4 t
Space requirement approx.: 2.2 x 3.8 x 3.25 m
internal coolant supply: Knoll KF 110/500 70 bar
Spindle probe for workpiece measurement: Renishaw OMP 60
Tool breakage and length measurement: Renishaw
Additional description:
Universal machining center with 5 simultaneously controlled axes with NC - swivel - rotary table. High-pressure coolant system Knoll 70 bar spindle probe Renishaw OMP 60 tool breakage and length measurement
7
x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm Control: M730BM MAPPS IV Speed: 12000 rpm Spindle motor: 15/11 kW Tool holder: BT 40 Tool magazine places: 60 Tool diameter max.: 70 mm Tool diameter with free adjacent spaces: 140 mm Tool length - max.: 550 mm Tool weight max.: 12 kg Number of pallets: 2 Pallet size: 500 x 500 mm Workpiece diameter - max.: 800 mm Workpiece height - max.: 1000 mm Table load: 700 kg Rapid traverse x/y/z: 60 m/min Feeds x/y/z: 60 m/min Total power requirement: 32 kVA Machine weight approx.: 11200 t table sensor tool setting & autom. Measurements: Metrol Machine footprint L x W x H: 3100 x 4860 mm Machine height: 2840 mm Additional description: Horizontal high-speed center with full B-axis and internal coolant supply.
x-travel: 730 mm
y-travel: 730 mm
z-travel: 880 mm
Control: M730BM MAPPS IV
Speed: 12000 rpm
Spindle motor: 15/11 kW
Tool holder: BT 40
Tool magazine places: 60
Tool diameter max.: 70 mm
Tool diameter with free adjacent spaces: 140 mm
Tool length - max.: 550 mm
Tool weight max.: 12 kg
Number of pallets: 2
Pallet size: 500 x 500 mm
Workpiece diameter - max.: 800 mm
Workpiece height - max.: 1000 mm
Table load: 700 kg
Rapid traverse x/y/z: 60 m/min
Feeds x/y/z: 60 m/min
Total power requirement: 32 kVA
Machine weight approx.: 11200 t
table sensor tool setting & autom. Measurements: Metrol
Machine footprint L x W x H: 3100 x 4860 mm
Machine height: 2840 mm
Additional description:
Horizontal high-speed center with full B-axis and internal coolant supply.
3
Pallet size: 630 x 630 mm Number of threaded holes / thread type: 25 M 16 Hole Pattern: 125*125mm Additional description: 6 pieces available.
Pallet size: 630 x 630 mm
Number of threaded holes / thread type: 25 M 16
Hole Pattern: 125*125mm
Additional description:
6 pieces available.
3
x-travel: 630 mm y-travel: 500 mm z-travel: 630 mm Control: Siemens 850 Number of tools in the magazine: 40 pieces Tool holder: SK-45 Speed: 20-6000 rpm Pallet size: 500x500 mm Total power requirement: kW Machine weight approx.: 12 t Space requirement approx.: m Additional description: High-performance machining center from an engine production line, equipped with a full 4th axis, IKZ, 2-fold pallet changer, Siemens 850 control, a total of 3 of these machines are available from stock, the machine package of the 3 machines also contains approx. 200 tool holders with tools that divided accordingly in the case of individual machine acceptance
x-travel: 630 mm
y-travel: 500 mm
z-travel: 630 mm
Control: Siemens 850
Number of tools in the magazine: 40 pieces
Tool holder: SK-45
Speed: 20-6000 rpm
Pallet size: 500x500 mm
Total power requirement: kW
Machine weight approx.: 12 t
Space requirement approx.: m
Additional description:
High-performance machining center from an engine production line, equipped with a full 4th axis, IKZ, 2-fold pallet changer, Siemens 850 control, a total of 3 of these machines are available from stock, the machine package of the 3 machines also contains approx. 200 tool holders with tools that divided accordingly in the case of individual machine acceptance
4
Pallet size: 400 x 400 mm Number of threaded holes / thread type: 24 M 16 Hole Pattern: 80*80mm Additional description: 12 pieces available. Surface has been sanded again.
Pallet size: 400 x 400 mm
Number of threaded holes / thread type: 24 M 16
Hole Pattern: 80*80mm
Additional description:
12 pieces available. Surface has been sanded again.
3
Control: Siemens Sinumerik 840D Table load: 0.7 t Workpiece spindle speed: 200 - 2300 rpm Total power requirement: 12 kW Machine weight approx.: t Space requirement approx.: m
Control: Siemens Sinumerik 840D
Table load: 0.7 t
Workpiece spindle speed: 200 - 2300 rpm
Total power requirement: 12 kW
Machine weight approx.: t
Space requirement approx.: m
1
Machining centersVertical machining centers
x-travel: 762 mm y-travel: 560 mm z-travel: 1020 mm Controls: Ultimax III Recording ISO: 40 Table dimension: 1300 x 700 mm Workpiece spindle speed: 30 - 4000 rpm Voltage: 380V Total power requirement: 7.5 - 5.5 kW Machine weight approx.: t Space requirement approx.: m
x-travel: 762 mm
y-travel: 560 mm
z-travel: 1020 mm
Controls: Ultimax III
Recording ISO: 40
Table dimension: 1300 x 700 mm
Workpiece spindle speed: 30 - 4000 rpm
Voltage: 380V
Total power requirement: 7.5 - 5.5 kW
Machine weight approx.: t
Space requirement approx.: m
9
Machining centersVertical machining centers
x-travel: 400 mm y-travel: 300 mm z-travel: 300 mm Control: Jasnac Tool holder: BT30 Total power requirement: kW Machine weight approx.: t Space requirement approx.: m
x-travel: 400 mm
y-travel: 300 mm
z-travel: 300 mm
Control: Jasnac
Tool holder: BT30
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m
5
Machining centersVertical machining centers
x-travel: 1300 mm y-travel: 500 mm z-travel: 500 mm Table size: 2079 x 500 mm Spindle diameter: 100mm Tool holder: SK 50 Spindle speeds - infinitely variable: 20 - 5000 rpm Feeds: 0 - 8000 mm/min Rapid traverse: 15000 mm/min electr. Version - voltage/frequency: 380 / 50 V/Hz Spindle motor: 23 kW Tool changer: 40 Control: Siemens 3M4c Machine weight approx.: 10 t Space requirement approx.: 4 x 3.5 x 3.2 m
x-travel: 1300 mm
y-travel: 500 mm
z-travel: 500 mm
Table size: 2079 x 500 mm
Spindle diameter: 100mm
Tool holder: SK 50
Spindle speeds - infinitely variable: 20 - 5000 rpm
Feeds: 0 - 8000 mm/min
Rapid traverse: 15000 mm/min
electr. Version - voltage/frequency: 380 / 50 V/Hz
Spindle motor: 23 kW
Tool changer: 40
Control: Siemens 3M4c
Machine weight approx.: 10 t
Space requirement approx.: 4 x 3.5 x 3.2 m
10
Machining centersVertical machining centers
x-travel: 1100 mm y-travel: 510 mm z-travel: 510 mm Rapid traverse: 18/18/15 m/min Control: Siemens Type: 840 D SL Shop Mill Table surface: 1200x600 mm Workpiece weight: 1000 kg Spindle speeds - infinitely variable: 8000 rpm Spindle mount: ISO: 40 Tool changer: 24 Cooling through the spindle: 20 bar Total power requirement: kW Machine weight approx.: 8 t Space requirement approx.: 3000x2350 m
x-travel: 1100 mm
y-travel: 510 mm
z-travel: 510 mm
Rapid traverse: 18/18/15 m/min
Control: Siemens
Type: 840 D SL Shop Mill
Table surface: 1200x600 mm
Workpiece weight: 1000 kg
Spindle speeds - infinitely variable: 8000 rpm
Spindle mount: ISO: 40
Tool changer: 24
Cooling through the spindle: 20 bar
Total power requirement: kW
Machine weight approx.: 8 t
Space requirement approx.: 3000x2350 m
8
Machining centersVertical machining centers
x-travel: 1020 mm y-travel: 510 mm z-travel: 610 mm Table surface: 1220 x 510 mm Tool holder: SK 40 Spindle speeds - infinitely variable: 80 - 8000 rpm Spindle drive: 15 kW Machine weight approx.: 6.4 t Space requirement approx.: 3.2 x 2.4 x 2.7 m
x-travel: 1020 mm
y-travel: 510 mm
z-travel: 610 mm
Table surface: 1220 x 510 mm
Tool holder: SK 40
Spindle speeds - infinitely variable: 80 - 8000 rpm
Spindle drive: 15 kW
Machine weight approx.: 6.4 t
Space requirement approx.: 3.2 x 2.4 x 2.7 m
5
Machining centersVertical machining centers
x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm Control: Siemens Type: 810 Tool holder: ISO 40 Total power requirement: kW Machine weight approx.: t Space requirement approx.: m
x-travel: 1000 mm
y-travel: 300 mm
z-travel: 400 mm
Control: Siemens
Type: 810
Tool holder: ISO 40
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m
9
Machining centersUniversal machining centers
x-travel: 700 mm y-travel: 600 mm z-travel: 600 mm Table surface: 630 mm Turntable: 360 degrees Tilting table angle min/max: 45/20 degrees Speed: 6300 rpm Controls: Pfilips Type: CNC 432 Spindle taper ISO: 40 Total power requirement: 27 KVA Machine weight approx.: 5.8 t Space requirement approx.: 4.1x2.3x2.4 m
x-travel: 700 mm
y-travel: 600 mm
z-travel: 600 mm
Table surface: 630 mm
Turntable: 360 degrees
Tilting table angle min/max: 45/20 degrees
Speed: 6300 rpm
Controls: Pfilips
Type: CNC 432
Spindle taper ISO: 40
Total power requirement: 27 KVA
Machine weight approx.: 5.8 t
Space requirement approx.: 4.1x2.3x2.4 m
10
Machining centersUniversal machining centers
x-travel: 1200 mm y-travel: 900 mm z-travel: 1250 mm Control: Siemens Type: System 3 Table surface: 630x630 mm Pallet changer type: Sp Spindle taper ISO: 50 Tool changer: 45 Total power requirement: kW Machine weight approx.: t Space requirement approx.: m
x-travel: 1200 mm
y-travel: 900 mm
z-travel: 1250 mm
Control: Siemens
Type: System 3
Table surface: 630x630 mm
Pallet changer type: Sp
Spindle taper ISO: 50
Tool changer: 45
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m
11
Machining centersMachining centers horizontal
x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm Controller: Fanuc Type: PRO-3 Tool holder: HSK 100 Drive power: 30 kW Speed: 12000 rpm Rapid traverse: 50 m/min Tool changer: 90 pos. Cooling through the spindle: 70 bar Pallet size: 630x630 mm Table load: 1200 kg Rotary table swivelling: 1 degree Pallet changer type: 2 Total power requirement: kW Machine weight approx.: 20 t Space requirement approx.: m
x-travel: 900 mm
y-travel: 800 mm
z-travel: 970 mm
Controller: Fanuc
Type: PRO-3
Tool holder: HSK 100
Drive power: 30 kW
Speed: 12000 rpm
Rapid traverse: 50 m/min
Tool changer: 90 pos.
Cooling through the spindle: 70 bar
Pallet size: 630x630 mm
Table load: 1200 kg
Rotary table swivelling: 1 degree
Pallet changer type: 2
Total power requirement: kW
Machine weight approx.: 20 t
Space requirement approx.: m
4
Machining centersMachining centers horizontal
x-travel: 800 mm y-travel: 800 mm z-travel: 5000 mm Control: Siemens Shooting: ISO 50 Spindle speed: 285-3000 Voltage: 380V Total power requirement: 36 kW Machine weight approx.: t Space requirement approx.: m
x-travel: 800 mm
y-travel: 800 mm
z-travel: 5000 mm
Control: Siemens
Shooting: ISO 50
Spindle speed: 285-3000
Voltage: 380V
Total power requirement: 36 kW
Machine weight approx.: t
Space requirement approx.: m
9
Machining centersMachining centers horizontal
x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Controller: Fanuc Type: PRO-3 Tool holder: HSK 100 Drive power: 30 kW Speed: 10000 rpm Rapid traverse: 35 m/min Tool changer: 90 pos. Cooling through the spindle: 70 bar Pallet size: 630x630 mm Table load: 1200 kg Rotary table swivelling: 1 degree Pallet changer type: 2 Total power requirement: kW Machine weight approx.: 15 t Space requirement approx.: m
x-travel: 800 mm
y-travel: 750 mm
z-travel: 770 mm
Controller: Fanuc
Type: PRO-3
Tool holder: HSK 100
Drive power: 30 kW
Speed: 10000 rpm
Rapid traverse: 35 m/min
Tool changer: 90 pos.
Cooling through the spindle: 70 bar
Pallet size: 630x630 mm
Table load: 1200 kg
Rotary table swivelling: 1 degree
Pallet changer type: 2
Total power requirement: kW
Machine weight approx.: 15 t
Space requirement approx.: m
7
Machining centersMachining centers horizontal
x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Controller: Fanuc Type: PRO-3 Tool holder: HSK 100 Drive power: 30 kW Speed: 10000 rpm Rapid traverse: 35 m/min Tool changer: 90 pos. Cooling through the spindle: 70 bar Pallet size: 630x630 mm Table load: 1200 kg Rotary table swivelling: 1 degree Pallet changer type: 2 Total power requirement: kW Machine weight approx.: 15 t Space requirement approx.: m
x-travel: 800 mm
y-travel: 750 mm
z-travel: 770 mm
Controller: Fanuc
Type: PRO-3
Tool holder: HSK 100
Drive power: 30 kW
Speed: 10000 rpm
Rapid traverse: 35 m/min
Tool changer: 90 pos.
Cooling through the spindle: 70 bar
Pallet size: 630x630 mm
Table load: 1200 kg
Rotary table swivelling: 1 degree
Pallet changer type: 2
Total power requirement: kW
Machine weight approx.: 15 t
Space requirement approx.: m
10
Machining centersMachining centers horizontal
x-travel: 800 mm y-travel: 630 mm z-travel: 710 mm Control: Siemens Type: 840DSL Number of spindles: 2 pcs. Speed: 30-12000 rpm Tool holder: HSK 63 Tool changer: 80 pos. Feed: 1-40,000mm/min Total power requirement: kW Machine weight approx.: t Space requirement approx.: m
x-travel: 800 mm
y-travel: 630 mm
z-travel: 710 mm
Control: Siemens
Type: 840DSL
Number of spindles: 2 pcs.
Speed: 30-12000 rpm
Tool holder: HSK 63
Tool changer: 80 pos.
Feed: 1-40,000mm/min
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m
10
Machining centersMachining centers horizontal
x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm Control: Siemens Type: 840DSL Number of spindles: 2 pcs. Total power requirement: kW Machine weight approx.: t Space requirement approx.: m
x-travel: 700 mm
y-travel: 700 mm
z-travel: 700 mm
Control: Siemens
Type: 840DSL
Number of spindles: 2 pcs.
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m
10
Machining centersMachining centers horizontal
x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Table surface: 500x400 mm Control: Siemens Type: 840D Spindle taper ISO: 40 Spindle speeds: 8000 rpm Pallet changer type: 2 Turntable: 360° Cooling through the spindle: bar Tool changer: 40 Total power requirement: kW Machine weight approx.: 11.5 t Space requirement approx.: m
x-travel: 600 mm
y-travel: 560 mm
z-travel: 560 mm
Table surface: 500x400 mm
Control: Siemens
Type: 840D
Spindle taper ISO: 40
Spindle speeds: 8000 rpm
Pallet changer type: 2
Turntable: 360°
Cooling through the spindle: bar
Tool changer: 40
Total power requirement: kW
Machine weight approx.: 11.5 t
Space requirement approx.: m
10
Machining centersMachining centers horizontal
x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Control: Siemens Pallet size: 400x500 mm Table load: 300 kg Feed: 40,000 m/min Spindle speed:: 20-8000 rpm Spindle taper ISO: 40 Spindle power: 13/20 KW Torque: 191 Nm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m
x-travel: 600 mm
y-travel: 560 mm
z-travel: 560 mm
Control: Siemens
Pallet size: 400x500 mm
Table load: 300 kg
Feed: 40,000 m/min
Spindle speed:: 20-8000 rpm
Spindle taper ISO: 40
Spindle power: 13/20 KW
Torque: 191 Nm
Total power requirement: kW
Machine weight approx.: t
Space requirement approx.: m
7
x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Control: HEIDENHAIN, TNC 430 Table clamping area: 1000 x 560 mm Spindle mount: DIN 69693 Spindle speeds: 15000 rpm Spindle motor: 10 kW Rapid traverse X/Y/Z axis: 1 - 35000 mm/min Spindle/table distance: min. 100 / max. 600 mm Tool changer: 30 positions Total power requirement: 37 kW Machine weight approx.: 7 t Machine dimensions L x W x H: 3.0 x 2.4 x 2.8 m
x-travel: 800 mm
y-travel: 600 mm
z-travel: 500 mm
Control: HEIDENHAIN, TNC 430
Table clamping area: 1000 x 560 mm
Spindle mount: DIN 69693
Spindle speeds: 15000 rpm
Spindle motor: 10 kW
Rapid traverse X/Y/Z axis: 1 - 35000 mm/min
Spindle/table distance: min. 100 / max. 600 mm
Tool changer: 30 positions
Total power requirement: 37 kW
Machine weight approx.: 7 t
Machine dimensions L x W x H: 3.0 x 2.4 x 2.8 m
7
x-travel: 650 mm y-travel: 500 mm z-travel: 530 mm Table clamping area: 800 x 500 mm Control: with FANUC MANUAL GUIDE Spindle speeds: 60 - 8000 rpm Spindle mount: DIN 69871 A Table load: max. 500 kg Rapid traverse X/Y/Z axis: 30 m/min Tool changer: 30 positions Tool diameter when fully loaded: 80 mm Tool diameter with 2 free spaces: 120 mm Tool length - max.: 250 mm Tool weight max.: 7 kg Total power requirement: 30 kVA Machine weight approx.: 4.5 t Machine dimensions L x W x H: 2.4 x 2.2 x 2.46 m
x-travel: 650 mm
y-travel: 500 mm
z-travel: 530 mm
Table clamping area: 800 x 500 mm
Control: with FANUC MANUAL GUIDE
Spindle speeds: 60 - 8000 rpm
Spindle mount: DIN 69871 A
Table load: max. 500 kg
Rapid traverse X/Y/Z axis: 30 m/min
Tool changer: 30 positions
Tool diameter when fully loaded: 80 mm
Tool diameter with 2 free spaces: 120 mm
Tool length - max.: 250 mm
Tool weight max.: 7 kg
Total power requirement: 30 kVA
Machine weight approx.: 4.5 t
Machine dimensions L x W x H: 2.4 x 2.2 x 2.46 m
6
x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm Table clamping area: 800 x 465 mm Spindle mount: SK 40 Control: HEIDENHAIN, TNC 430 Spindle speeds - infinitely variable: 20 - 10,000 rpm Feeds x/y/z - infinitely variable: 1 - 30,000 mm/min Feed force: 6000 N Rapid traverse: 35 m/min Tool changer: 30 positions Total power requirement: 30 kVA Machine weight approx.: 6.7 t
x-travel: 600 mm
y-travel: 450 mm
z-travel: 450 mm
Table clamping area: 800 x 465 mm
Spindle mount: SK 40
Control: HEIDENHAIN, TNC 430
Spindle speeds - infinitely variable: 20 - 10,000 rpm
Feeds x/y/z - infinitely variable: 1 - 30,000 mm/min
Feed force: 6000 N
Rapid traverse: 35 m/min
Tool changer: 30 positions
Total power requirement: 30 kVA
Machine weight approx.: 6.7 t
5
x-travel: 1660 mm y-travel: 510 mm z-travel: 510 mm Table clamping area: 2000 x 510 mm Spindle mount: SK 40 Spindle speeds: 40 - 10,000 rpm Spindle motor: 15 kW Control: FUSION 640 M Rapid traverse x/y/z: 30 m/min Distance spindle nose and table: 180 - 690 mm Table load: max. 1000 kg Workpiece dimensions: max. 4000 x 655 x 640 mm Number of tool magazine places: 30 Tool diameter when fully loaded: 80 mm Tool diameter with 2 free spaces: 110 mm Tool length max.: 350 mm Tool weight max.: 8 kg internal coolant supply: 15 bar Machine weight approx.: 8.8 t Dimensions L x W x H: 4.1 x 3.15 x 2.6 m
x-travel: 1660 mm
y-travel: 510 mm
z-travel: 510 mm
Table clamping area: 2000 x 510 mm
Spindle mount: SK 40
Spindle speeds: 40 - 10,000 rpm
Spindle motor: 15 kW
Control: FUSION 640 M
Rapid traverse x/y/z: 30 m/min
Distance spindle nose and table: 180 - 690 mm
Table load: max. 1000 kg
Workpiece dimensions: max. 4000 x 655 x 640 mm
Number of tool magazine places: 30
Tool diameter when fully loaded: 80 mm
Tool diameter with 2 free spaces: 110 mm
Tool length max.: 350 mm
Tool weight max.: 8 kg
internal coolant supply: 15 bar
Machine weight approx.: 8.8 t
Dimensions L x W x H: 4.1 x 3.15 x 2.6 m
6
x-travel: 1500 mm y-travel: 650 mm z-travel: 650 mm Pallet size: 1740 x 650 mm Spindle mount: SK 50 Spindle speeds: 25 - 6000 rpm Feeds - longitudinal/transverse/vertical: max. 8 mm/min Rapid traverse lengthways and crossways: 26 m/min Rapid traverse vertical: 20 m/min Spindle throat: 665 mm Distance spindle nose and table: 200 / 850 mm Drilling into the solid: 50 mmø Thread cutting: M 45 Tool changer: 60 pos Tool diameter: 125 mm Tool diameter with 2 free spaces: 260 mm Tool length max.: 400 mm Tool weight max.: 20 kg Spindle motor: 18.5 kW Torque on the spindle: max. 758 Nm Control: MAZATROL M PLUS
x-travel: 1500 mm
y-travel: 650 mm
z-travel: 650 mm
Pallet size: 1740 x 650 mm
Spindle mount: SK 50
Spindle speeds: 25 - 6000 rpm
Feeds - longitudinal/transverse/vertical: max. 8 mm/min
Rapid traverse lengthways and crossways: 26 m/min
Rapid traverse vertical: 20 m/min
Spindle throat: 665 mm
Distance spindle nose and table: 200 / 850 mm
Drilling into the solid: 50 mmø
Thread cutting: M 45
Tool changer: 60 pos
Tool diameter: 125 mm
Tool diameter with 2 free spaces: 260 mm
Tool length max.: 400 mm
Tool weight max.: 20 kg
Spindle motor: 18.5 kW
Torque on the spindle: max. 758 Nm
Control: MAZATROL M PLUS
3
x-travel: 1050 mm y-travel: 560 mm z-travel: 510 mm Table size: 1200 x 560 mm Spindle taper ISO: 50 Speed range: 15 - 4000 rpm Feeds - longitudinal/transverse/vertical: 1 - 3000 mm/min Rapid traverse - longitudinal/transverse/vertical: 10 m/min Distance spindle nose and table: 150 - 660 mm Distance between spindle center and stand: max. 650 mm Table load: max. 1 ton Number of tool magazine places: 24 Tool diameter: 110mm Tool length max.: 350 mm Tool weight max.: 15 kg Spindle motor: 7.5 kW Control: FANUC 11 MA Total power requirement: 13 kW Machine weight approx.: 9.1 t
x-travel: 1050 mm
y-travel: 560 mm
z-travel: 510 mm
Table size: 1200 x 560 mm
Spindle taper ISO: 50
Speed range: 15 - 4000 rpm
Feeds - longitudinal/transverse/vertical: 1 - 3000 mm/min
Rapid traverse - longitudinal/transverse/vertical: 10 m/min
Distance spindle nose and table: 150 - 660 mm
Distance between spindle center and stand: max. 650 mm
Table load: max. 1 ton
Number of tool magazine places: 24
Tool diameter: 110mm
Tool length max.: 350 mm
Tool weight max.: 15 kg
Spindle motor: 7.5 kW
Control: FANUC 11 MA
Total power requirement: 13 kW
Machine weight approx.: 9.1 t
2
x-travel: 1000 mm y-travel: 508 mm z-travel: 460 mm Pallet size: 1240 x 550 mm Number of pallets: 2 Workpiece weight: 800 kg Spindle taper ISO: 40 Spindle drive: 5.5 kW Speed range: 28 - 4000 rpm Number of tool magazine places: 30 Control: MAZATROL M 1 Machine weight approx.: 5.6 t Approx. space requirement: 4.50 x 3.00 x 2.65 m
x-travel: 1000 mm
y-travel: 508 mm
z-travel: 460 mm
Pallet size: 1240 x 550 mm
Number of pallets: 2
Workpiece weight: 800 kg
Spindle taper ISO: 40
Spindle drive: 5.5 kW
Speed range: 28 - 4000 rpm
Number of tool magazine places: 30
Control: MAZATROL M 1
Machine weight approx.: 5.6 t
Approx. space requirement: 4.50 x 3.00 x 2.65 m
7
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Table clamping area: 1250 x 700 mm NC rotary table: integrated, 700 mmø Spindle mount: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Control: TNC 430 Feeds x/y/z - infinitely variable: 20 - 15,000 mm/min Rapid traverse: 30 m/min Tool changer: 32 (2 x 16) pos Tool diameter: 80 / 130 mm Tool length max.: 315 mm Tool weight max.: 8 kg NC rotary table - speed -: max. 15 rpm Table load: 600 / 500 kg Total power requirement: 60 kW Machine weight approx.: 9.6 t
x-travel: 880 mm
y-travel: 630 mm
z-travel: 630 mm
Table clamping area: 1250 x 700 mm
NC rotary table: integrated, 700 mmø
Spindle mount: DIN 69871
Spindle speeds - infinitely variable: 20 - 12,000 rpm
Control: TNC 430
Feeds x/y/z - infinitely variable: 20 - 15,000 mm/min
Rapid traverse: 30 m/min
Tool changer: 32 (2 x 16) pos
Tool diameter: 80 / 130 mm
Tool length max.: 315 mm
Tool weight max.: 8 kg
NC rotary table - speed -: max. 15 rpm
Table load: 600 / 500 kg
Total power requirement: 60 kW
Machine weight approx.: 9.6 t
2
x-travel: 660 mm y-travel: 500 mm z-travel: 600 mm Table clamping area: 630 x 500 mm Spindle mount: SK 40 Spindle speeds: 20 - 6,300 rpm Feeds: 30 m/min Control: PHILIPS CNC 532 internal coolant supply: 40 bar Total power requirement: 50 kW Machine weight approx.: 13.3 t Machine dimensions: 4.98 x 2.78 x 2.93 m
x-travel: 660 mm
y-travel: 500 mm
z-travel: 600 mm
Table clamping area: 630 x 500 mm
Spindle mount: SK 40
Spindle speeds: 20 - 6,300 rpm
Feeds: 30 m/min
Control: PHILIPS CNC 532
internal coolant supply: 40 bar
Total power requirement: 50 kW
Machine weight approx.: 13.3 t
Machine dimensions: 4.98 x 2.78 x 2.93 m
5
x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm Round table diameter: 270 mm Rotary table swivelling: 0 - 24 ° Spindle taper ISO: 30 Spindle speeds: 31.5 - 7100 rpm Feed speed: 1 - 10,000 mm/min Control: SINUMERIK System 8 Number of tool magazine places: 40 Tool diameter with 2 free spaces: 100 mm Tool length max.: 255 mm Tool weight max.: 6 kg Total power requirement: 32 kW Machine weight approx.: 11.6 t
x-travel: 560 mm
y-travel: 450 mm
z-travel: 450 mm
Round table diameter: 270 mm
Rotary table swivelling: 0 - 24 °
Spindle taper ISO: 30
Spindle speeds: 31.5 - 7100 rpm
Feed speed: 1 - 10,000 mm/min
Control: SINUMERIK System 8
Number of tool magazine places: 40
Tool diameter with 2 free spaces: 100 mm
Tool length max.: 255 mm
Tool weight max.: 6 kg
Total power requirement: 32 kW
Machine weight approx.: 11.6 t
10
x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm Tool holder: HSK 63 Spindle speeds: 0 - 10000 rpm Rapid traverse: 30 m/min
x-travel: 450 mm
y-travel: 400 mm
z-travel: 320 mm
Tool holder: HSK 63
Spindle speeds: 0 - 10000 rpm
Rapid traverse: 30 m/min
6
5-axis machining centre with 10-compartment tool changer for aluminium or PVC profiles Max. Machining length: 6.700 mm Y-axis travel: 1000 mm Z-axis travel: 650 mm Pivot angle A-axis: 0 °-180 ° Angle C-axis: 0 °-180 ° Max. Speed 24,000 U. per Min. Weight: approx. 6,500 kg Minimum quantity spraying Tensioner detection and automatic displacement 8 pneumatic material tensioners Pendulum-operated operation with two light barriers Hand control panel Many tool holders, including the angle head and saw blade Loading is included in the price
5-axis machining centre with 10-compartment tool changer for aluminium or PVC profiles
Max. Machining length: 6.700 mm
Y-axis travel: 1000 mm
Z-axis travel: 650 mm
Pivot angle A-axis: 0 °-180 °
Angle C-axis: 0 °-180 ° Max. Speed 24,000 U. per Min.
Weight: approx. 6,500 kg Minimum quantity spraying
Tensioner detection and automatic displacement 8 pneumatic material tensioners
Pendulum-operated operation with two light barriers
Hand control panel
Many tool holders, including the angle head and saw blade
Loading is included in the price
5
Table: 4020 x 2400 mm Max weight on table: 15.000 Kgs X-axis traverse: 4020 mm Y-axis traverse: 2500 mm Z-axis traverse: 1000 mm Distance between columns: 2700 mm Distance from upright to table (beam): 1500 mm Direct outlet head: 6000 rpm Extender: 4000 rpm Angular manual head: 90º - 3000 rpm (with internal coolant supply) Spindle taper: BT 50 Rapid traverses (X, Y, Z): 15 m/min Spindle motor: 22 kW Year: Dec 2015 - Set up in May 2016 Equipped with: Control: HEIDENHAIN iTNC-530 Electronic Handwheel: HR410 Internal chip extractor: auger type Chip conveyor: chain type Chip container: Yes CE enclosure: Yes
Table: 4020 x 2400 mm
Max weight on table: 15.000 Kgs
X-axis traverse: 4020 mm
Y-axis traverse: 2500 mm
Z-axis traverse: 1000 mm
Distance between columns: 2700 mm
Distance from upright to table (beam): 1500 mm
Direct outlet head: 6000 rpm
Extender: 4000 rpm
Angular manual head: 90º - 3000 rpm (with internal coolant supply)
Spindle taper: BT 50
Rapid traverses (X, Y, Z): 15 m/min
Spindle motor: 22 kW
Year: Dec 2015 - Set up in May 2016
Equipped with:
Control: HEIDENHAIN iTNC-530
Electronic Handwheel: HR410
Internal chip extractor: auger type
Chip conveyor: chain type
Chip container: Yes
CE enclosure: Yes
11
Max. Machining length: 2.600 mm Y-axis travel: 315 mm Z-axis travel: 230 mm Speed milling spindle infinitely variable between 2,800 and 12,000 U. per minute Rotatable support table between 0 ° and 180 °, thereby 3-page machining in a clamping X and y-axis CNC controlled, Z-axis infinitely variable lowerable 4 pneumatic material tensioners Manual Tool Change Minimum quantity spraying device USB connector User Manual
Max. Machining length: 2.600 mm
Y-axis travel: 315 mm
Z-axis travel: 230 mm
Speed milling spindle infinitely variable between 2,800 and 12,000 U. per minute
Rotatable support table between 0 ° and 180 °, thereby 3-page machining in a clamping
X and y-axis CNC controlled, Z-axis infinitely variable lowerable
4 pneumatic material tensioners
Manual Tool Change
Minimum quantity spraying device
USB connector
User Manual
6
Leadwell MCV OP Table size : 650X350mm Travels : X - 510mm Y - 360mm Z - 410mm Tools Changer : 16pcs BT 40 Spindel speed : 6000rpm Control : Fanuc OM Weight : 3000kg
Leadwell MCV OP
Table size : 650X350mm
Travels : X - 510mm Y - 360mm Z - 410mm
Tools Changer : 16pcs
BT 40
Spindel speed : 6000rpm
Control : Fanuc OM
Weight : 3000kg
2
Cincinnati Milacron 5 axis Model : 20v-80 Year : 1987 Control : New in 2015 SHARNOA Travels : X - 2000mm(80 in) Y - 760mm(30 in) Z - 610mm(24 in) A - 50* B - 50* Table : 2135 X 760 mm ( 84X30 in) Load capacity : 3175kg ( 7000lbs) Spindel : 20-3600rpm ( 20HP) Spindel taper : 50
Cincinnati Milacron 5 axis
Model : 20v-80
Year : 1987
Control : New in 2015 SHARNOA
Travels : X - 2000mm(80 in)
Y - 760mm(30 in)
Z - 610mm(24 in)
A - 50*
B - 50*
Table : 2135 X 760 mm ( 84X30 in)
Load capacity : 3175kg ( 7000lbs)
Spindel : 20-3600rpm ( 20HP)
Spindel taper : 50
11
Max. X-axis travel: 3850 mm Max. Y-axis travel: 350 mm Max. Z-axis travel: 280 mm Max. Spindle speed: 21,000 U per min. Weight: approx. 1800 kg 3-axis machining centre with automatic tool changer for aluminium or PVC profiles Control E 550 Speed stepless up to 21,000 U. per minute adjustable manual operating unit Minimum quantity spraying Automatic tool change (4 places plus angle head) Spanner detection 5 pneumatic material tensioner photoelectric sensor Fence with door opener-contact
Max. X-axis travel: 3850 mm
Max. Y-axis travel: 350 mm
Max. Z-axis travel: 280 mm
Max. Spindle speed: 21,000 U per min.
Weight: approx. 1800 kg
3-axis machining centre with automatic tool changer for aluminium or PVC profiles
Control E 550 Speed stepless up to 21,000 U. per minute adjustable manual operating unit Minimum quantity spraying Automatic tool change (4 places plus angle head)
Spanner detection 5 pneumatic material tensioner photoelectric sensor
Fence with door opener-contact
8
Machining centersVertical machining centers
FEHLMANN Picomax 60CNC + 4/5 Achse Mit Cellro robot Robot kan Werkstücke un Werkzeugen wechselen !!!! CNC-Bohr-Fräsmaschine mit Steuerung Heidenhain Tischgrösse 920x380 mm, Verfahrwege X/Y/Z - 500/350/610 mm, max. Tischbelastung 250 kg, Spindeldrehzahlen stufenlos 50-18'000 U/Min., Spindelleistung 10,2 KW, Bohrleistung Ø 25 mm, Gewindeschneidleistung M 20, Werkzeugsystem SK 30, elektrisches Handrad, Zentralschmierung, IKZ Renishaw 3 D taster Blum Werkzeugvermessung Sehr viele Werkzeuge und Aufnahmen,
FEHLMANN Picomax 60CNC + 4/5 Achse
Mit Cellro robot
Robot kan Werkstücke un Werkzeugen wechselen !!!!
CNC-Bohr-Fräsmaschine mit Steuerung Heidenhain
Tischgrösse 920x380 mm,
Verfahrwege X/Y/Z - 500/350/610 mm,
max. Tischbelastung 250 kg,
Spindeldrehzahlen stufenlos 50-18'000 U/Min., Spindelleistung 10,2 KW,
Bohrleistung Ø 25 mm,
Gewindeschneidleistung M 20,
Werkzeugsystem SK 30, elektrisches Handrad, Zentralschmierung,
IKZ
Renishaw 3 D taster
Blum Werkzeugvermessung
Sehr viele Werkzeuge und Aufnahmen,